Docs

Getting started

Getting started Before you start Register with The Things Network Configure firmware Confirm first telemetry Registering your balloon Pre-launch checklist

System architecture

System architecture Payload Position and motion Temperature and pressure Acceleration and orientation Light and sound Power and radio Packets and data flow Interpreting a flight

Hardware setup

Hardware setup Parts and board Assemble the payload Antennas and suspension Build and flash Verify the hardware

Balloon preparation

Balloon preparation Before you start Stretch and check for leaks Float calculator How the calculation works Model limits Measure the lift Seal and suspend the payload

Dashboard guide

Dashboard guide Fleet view Flight history Position and altitude Temperature Power, light, and orientation Radio reception Map layers Your balloons

API reference

API reference Read telemetry Time ranges and pagination Device fields Telemetry fields Forecasts Errors TTN webhooks Run your own backend

Troubleshooting

Troubleshooting Build or programming failure No join in TTN Packets without a usable position TTN receives packets but the dashboard is empty Unexpected power or sensor readings